Solar Rooftop for Homes & Commercial - EcoSoch Solar
Global Solar produces light weight, flexible solar panels for residential and commercial structures, and mobile, and recreational uses. SkyPower is the largest and one of the most successful developers and owners of utility-scale solar energy projects in the world. With roots dating back more. Waaree is one of the leading Solar Panel Companies in India. So if you are planning to install Solar Panels for your home and office then check our website.
The advantages of Studer inverter over conventional inverters are many. You can find more about the Studer inverter here in this blog. The main reason is that a 2. See below for its ratings.
CIGS Flexible Solar Panels
Apart from that, most conventional Indian inverters are very inefficient and none of these inverter manufacturers have ever got their inverters tested for their efficiency. Efficiency test report of Studer can be found here. Measuring the generation and grid usage: Most system installations in India are done without any measuring meters. We want our clients to be able to measure their generations and consumptions as it was originally promised and to ensure that the system is working fine.
This is an aspect that we think is very important.
Normally we could put an expensive DC meter to measure the solar generation. Considering that this is a small off-grid system, we installed two static energy AC meters that could give us the solar generation indirectly. Meter 1 measures the total consumption house loads of power from the battery. The grid will charge the batteries, only if the solar charging is very less or the battery is drained fully. In order to get the total generation from solar. This simple set up was used so that our off-grid customers are aware of how solar on their roof is performing.
SkyPower Global - Generating a Brighter Future
Remember that this was in Since then we have got better digital online monitoring systems that not only could measure the solar generation and grid charging, but also can measure the total consumption of the loads from the batteries along with the battery state of charge and discharge. Here is the image of the new monitoring system for an off-grid system Electrical Components: An SPD is used to protect the voltage spikes that could happen because of any lightning strikes.
A DC switch is used between PV modules and the charge controller in order to manually disconnect the solar from rest of the system during installation and maintenance.
We have connected the Fuses between the batteries and the inverter. Same fuses are connected between the batteries and the charge controller as well. These fuses are used to protect from Surges in the current.
Generating A Brighter Future
They are provided as an additional safety mechanism in order protect the equipment and batteries from any short circuit currents. An MCB is similar to the fuse, except that it automatically switches off if there is a faulty short circuit or overload conditions. It can be turned back on once the faulty condition is rectified. Although we have taken care of all of the conditions in order to ensure that the system can work seamlessly without much disruption, there are still chances that the components could still break out our client could go without power during the night.
This is to be used as a last resort only if there are some faults in the system and the customer could continue using the power as if the solar system is switched off. A typical solar rooftop system is designed such that it lasts for the life of the solar panels at least, which is 25 years. In order to ensure that the life of the solar mounting structure lasts as long, we at Ecosoch Solar use Aluminium Structure and SS Fasteners.
Even if there is complete shade on the panels, only that part will stop generating power while the other panels keep generating power by making use of sunlight even in overcast conditions. As a result, everybody opts for temporary power connection from Bescom that costs anywhere between Rs 5 to 8 lakh depending on the load. But here, all such works have been carried out by using solar power.
Global Solar | Flexible Solar Panels
No worker had any complaints about the quality of power being supplied at any part of the day. As the work at construction site starts around 10 am, till then the batteries get charged to the maximum level.Grid Connected Rooftop Solar power System .
As the work started, workers consumed whatever energy that was produced directly. Today, the engineers have installed a total of panels on top of the roof with each generating about watts.
The entire 20 Kw solar unit has cost approximately Rs 36 lakh including the panels, fabricated steel structure, inverters, batteries and electrical accessories, according to engineers. While two of them have a capacity of 8 Kw each, another processes about 4 Kw.
These inverters are based on a Swizz technology and are hybrid in nature. The inverters are connected to two battery sets with a capacity of 1, ah each. These are absolutely maintenance-free batteries and have a lifespan of years depending on the usage. The system is equipped with a wireless technology and linked to a Wi-Fi modem.